![]() ![]() Using extra pressure or inadequate pressure for tagging,ĭust in the tag pin movement area of needle, etc. Using damaged tag pin strip in the tag gun, Using unsuitable tag pins in the tag gun, ![]() Tag gun may get jammed due to the following reasons:. Rotate back the needle locker into the original position and you are ready to tag agian ! Keeping the needle locker in the same position, insert the new needle in the same slot, ensuring the slot on the needle matches the slot on the Tag Gun body, until it goes inside fully (a) Rotate the needle locker to the opposite direction making it parallel to the needle (b) Just pull out the needle Please follow below steps to replace your damaged tag gun needle. ![]() If the damaged needle is not replaced, it can cause severe damage to fabric, tag pin and tag gun. Tag gun needle damage happens normally due to mishandling of tag gun by the user - for example, dropping the tag gun, leaving the tag gun without needle cap, using the tag gun to tag more thicker fabrics, and, tilting the tag gun roughly while using can cause needle damage. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |